2018 John Deere X350, 42-in. deck

Selling Price -

$2,995.00

2018 JOHN DEERE X350 LAWN TRACTOR WITH 42" DECK

Information

2018 John Deere X350, 42-in. deck

Lawn Tractor with 42-inch Deck
  • Powered by 18.5 hp (13.8 kW)* iTorque™ Power System
  • 42-in. Accel Deep™ Deck
  • Upgraded instrument panel
  • 4 year/300 hour bumper-to-bumper warranty

Features may include:

Engine is smooth-running and reliable V-twin air-cooled design

The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive hood design that provides superior lugging ability, even cooling, and durability.

  • 18.5 hp (13.8 kW)
  • Large 603-cc displacement
  • V-twin air-cooled design that provides smooth, quiet power
  • Quality features include:
  • Cast-iron cylinder liners
  • Overhead valves
  • Full-pressure lubrication
  • Replaceable oil filter
  • Dual-stage air cleaner
  • V-twin design:
  • Excellent power and performance
  • Easy starts
  • Smooth operation
FLYWHEEL ALTERNATOR

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

  • 15-amp capacity
  • Regulated to keep the battery at full charge without risk of overcharging
Frame is reliable heavy-duty welded steel

The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:

  • The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
  • Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.
  • Rear hitch plate can support two 42-lb (19-kg) Quik-Tatch weights.
  • Weight bracket is built into the frame of two-wheel-steer models.
The 42-in. (107-cm) Accel Deep™ (42A) Mower Deck cuts clean and is versatile

The 42-in. (107-cm) Accel Deep mower deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:

  • 4.97-in. (12.6-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
  • Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
  • Mower deck suspended from the vehicle for a smooth and level cut
  • Adjustable mower wheels, positioned just above ground level, for reduced scalping

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

  • Reducing the amount of re-cutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
  • Helps maintain excellent cut quality at faster mowing speeds
  • Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
  • Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal re-cutting, and an even distribution of clippings.

Photos

Highlights

  • $2,995.00
  • Oakland, Maryland
  • Pre-Owned
  • 2018
  • John Deere
  • X350, 42-in. deck
  • GREEN
  • KAWASAKI
  • 21.5
  • 148
  • Equipment mounting: heavy duty | Mower attachability: Slide under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Two pins and spring clips
  • Gas
  • Available
  • With mower: 50.5 in. (128 cm) | With mower (deflector raised for storage): 50.5 in. (128 cm) | Without mower: 38 in. (96.5 cm)
  • 47 in. (120 cm)| Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • 42
  • KAWASAKI

Specifications

  • 2018
  • John Deere
  • X350, 42-in. deck
  • Base
  • Riding
  • Model: FS600V
  • Overhead valve, full-pressure lube, oil filter
  • 18.5 hp (13.8 kW)
  • 36.8 cu in. (603 cc)
  • V-twin, cast-iron liners
  • Mechanical
  • Separate levers, automatic choke return
  • Air
  • Dry, replaceable with foam precleaner
  • Transaxle: Internal, not replaceable
  • Gasoline
  • Delivery: Pulse pump, carburetor
  • Gauge on dash
  • Manual, sector and pinion
  • Mower: Electric power take-off (PTO) clutch, in-line belt
  • Fuel tank location: Rear | Hourmeter | Cruise Control: button on dash | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Weight bracket: Standard rear | Floor mats: Sure-grip rubber | Storage: On fender and under seat | Service interval decal | Cup holder | Preset cut height | Mower deck type: Side discharge | Mower wash port | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
  • Internal wet disc
  • Cast iron front axle, front wheel ball bearings
  • 15x6-6
  • 20x10-8
  • Mower: Two | Mower, adjustment: Four-position, tool required
  • 12 V (340 CCA)
  • Flywheel alternator, regulated, 15 amp
  • Engine: Bendix
  • Transaxle Forward speed: 0-5.5 mph (0-8.9 km/h) | Transaxle Reverse speed: 0-4 mph (0-6.4 km/h)
  • Equipment mounting: heavy duty | Mower attachability: Slide under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Two pins and spring clips
  • Welded heavy-duty
  • Fuel fill opening, On left fender: 3 in. (7.6 cm) | Steering, Uncut circle radius: 26 in. (66 cm)
  • 72 in. (182.9 cm)
  • 47 in. (120 cm)| Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • With mower: 50.5 in. (128 cm) | With mower (deflector raised for storage): 50.5 in. (128 cm) | Without mower: 38 in. (96.5 cm)
  • 49.4 in. (125.5 cm)
  • 42 in. (107 cm)
  • Steering: 16 in. (40.6 cm)
  • Back: 15 in. (38.1 cm)
  • Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm)
  • Large: 14 in. (35.6 cm)
  • Tank: 3.3 U.S. gal. (12.5 L)
  • Mower, no fuel: 543 lb (246 kg)
  • Two standard, incandescent, 27 W
  • Meets ANSI standard | Meets OPEI standard | Safety video
  • Open-back design with grasp | Suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
  • Type: Foot pedal with optional adjustable spring assist kit
  • Hood: Molded-in color hood material reduces sound, will not rust or dent
  • Fender: Stamped steel | Mower: Stamped steel deck shell, 12 gauge 0.105 in. (2.7 mm)
  • 13 positions
  • U.S.: 4 year/300 hour bumper-to-bumper
  • 42
  • KAWASAKI