Engine is smooth running and reliable V-twin air-cooled design
The tractor is powered by a John Deere iTorque power system, a combination of engine features and an exclusive hood design that provide superior lugging ability, even cooling, and durability.
A 23-hp (17.2-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions.
23 hp (17.2 kW)
Large 44.3 cu in. (726-cc) displacement
V-twin air-cooled design that provides smooth, quiet power
Quality features include:
Cast-iron cylinder liners
Overhead valves
Full-pressure lubrication
Replaceable oil filter
Dual-stage air cleaner V-twin design:
Excellent power and performance
Easy starts
Smooth operation
A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:
12-amp charging capacity
Regulated to keep the battery at full charge without risk of overcharging
Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:
Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.
Located on the left fender
Helps eliminate spillage
Electronic fuel gauge on the dash display allows the operator to easily monitor the amount of fuel in the tank.
Transaxle Type: K58 hydrostatic integrated with transaxle
Gas
Available
with mower: 68.4 in. 174 cm
Seat back: 15 in. 38.1 cm | Mower cut: 13 positions, 1-4 in. 2.5-10.2 cm | Cut increments: 0.25 in. 0.64 cm | 47 in. 120 cm
54
KAWASAKI
Specifications
2020
John Deere
X300 Series
X390 54-inch deck
Riding
FS651V
Overhead valve, full-pressure lube, oil filter
22 hp 16.4 kW
V-twin, cast-iron liners
44.3 cu in. 726 cc
Dry, replaceable with foam precleaner
method: Air | Oil cooler: Fins and fan on transaxle
Internal, not replaceable
Bendix
Gasoline
Transaxle Type: K58 hydrostatic integrated with transaxle
Type: Power, hydraulic | wheel: Large, 14 in. 35.6 cm
Mechanical
speed control: Separate levers, automatic choke return
Internal wet disc
15x6.5-8
22x11-10
12 V 340 CCA
Flywheel alternator, regulated, 15 amp
Transaxle: Twin Touch™ pedals
Forward: 0-6.2 mph 0-10 km/h | Reverse: 0-3.5 mph 0-5.6 km/h
Mower: Electric power take-off (PTO) clutch, in-line belt | Dual belt
Welded heavy-duty
Open-back design with grasp | suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
Headlights: Two standard, incandescent, 27 W
Fuel fill opening: On left fender, 3 in. 7.6 cm | Uncut circle radius: 22 in. 56 cm | Fore-aft adjustment: While seated, slide rail, 14-position, 7 in. 17.8 cm | Mower deck Type: Side discharge
72 in. 182.9 cm
with mower: 68.4 in. 174 cm
Accel Deep™ mower deck, 54 in. 137 cm | with mower (deflector raised for storage): 59.4 in. 151 cm | without mower: 38.5 in. 97.5 cm
Seat back: 15 in. 38.1 cm | Mower cut: 13 positions, 1-4 in. 2.5-10.2 cm | Cut increments: 0.25 in. 0.64 cm | 47 in. 120 cm
22 in. 55.9 cm
49.4 in. 125.5 cm
tank: 3.3 U.S. gal. 12.5 L
Mower, no fuel, 686 lb 311 kg
Fuel delivery: Pulse pump, carburetor | Fuel gauge: Gauge on dash | Fuel tank location: Rear | Oil drain: No tools | Cruise control: Yes, button on dash | Primer/paint: E-coat/powder | Weight bracket: Standard rear | Front axle: Cast iron front axle, front wheel ball bearings | Storage: On fender and under seat | Equipment mounting: Yes, heavy duty | Tilt steering wheel: Standard, five position | Mower wheels: Four | Mower wheel adjustment: Seven-position, spring-loaded pin | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge | Mower attachability Type: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins | Mower wheels rotate: Yes, 90 degrees for easy mower removal | Safety Backup protection: Reverse Implement Option (RIO)
Lift system Type: Hydraulic
Spindle bushings: Metal, replaceable | Hood: Molded-in color hood material reduces sound, will not rust or dent | Floor mats: Sure-grip rubber | Stamped steel deck shell
Fender: Stamped steel | Mower: 10 gauge 0.135 in. 3.4 mm
4 year/300 hour bumper-to-bumper ( Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)