2018 John Deere X590, 48-in. Deck

2018 JOHN DEERE X590 GARDEN TRACTOR WITH 48" DECK
MoreLess
Limited Time Offer!

Selling Price -$7,195.00

2018 John Deere X590, 48-in. Deck

Lawn Tractor with 48-in. Deck
  • 48-in. Accel Deep™ Deck
  • Excellent power and performance
  • Constant-speed governor technology
  • 4-year/500-hour bumper-to-bumper warranty

Features may include:

V-twin engine has electronic fuel injection (EFI) and constant-speed governor for quick starts and superior performance

The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive hood design providing superior lugging ability, even cooling, and durability. Key engine features include:

  • 25.5 hp (19 kW) at 3500 rpm
  • Large 726-cc displacement

V-twin air-cooled design

  • Excellent power and performance
  • Smooth, quiet power
  • Easy starts

Quality features include:

  • Cast-iron cylinder liners
  • Overhead valves
  • Full-pressure lubrication
  • Replaceable oil filter
  • Dual-stage air cleaner
  • Solenoid-shift starter for easy starts, even in cold weather

Electronic fuel injection (EFI)

  • EFI meters the correct amount of fuel directly into each engine cylinder for all operating conditions.
  • It simplifies engine starts and warm-up by eliminating the need for the operator to use a choke.
  • Fuel usage is reduced up to 10 percent compared to a carbureted engine.

Constant-speed governor

  • Constant-speed governor works in conjunction with EFI to electronically adjust the supply of fuel air mixture, to increase torque as needed to maintain engine operating speed under load.
  • Ground speed and mower blade-tip speed remain constant, even in heavy-grass conditions, to improve productivity and cut quality.
  • Mechanical governors cannot respond fast enough to maintain a constant engine speed.
  • Some torque rise remains to warn the operator before the engine stalls.
  • X590's constant-speed governor is a first in the mowing industry.
ELECTRONIC FUEL INJECTION AND CONSTANT-SPEED GOVERNOR

No choke control is needed for the EFI engine because a servo motor controls the intake air butterfly valve and the air stream. For cold starts the actuator will close the valve, making starting the engine easier - no choke lever is needed. Starts are quick and easy - even for inexperienced operators.

The advanced engine features provide the following advantages:

Constant-speed governor improves performance.

  • Mowing time is reduced as the constant-speed governor keeps the engine operating at optimum speed, responding instantaneously as the mower transitions from light to heavy mowing.
  • Cut quality is improved, especially in difficult mowing conditions, because the constant-speed governor keeps the mower blades turning at full speed, delivering optimal cut quality and dispersion of clippings. While snow blowing, maintaining the fan speed enables consistent snow placement.

EFI increases uptime.

  • Fast, reliable starts are routine just like with a modern automobile. EFI automatically meters fuel, including the extra fuel needed to start a cold engine. Flooding by unnecessary choking of a warm engine is eliminated. No carburetor adjustments are needed at altitude.
  • No choke-related problems since the choke is eliminated, thus ensuring operator confidence and quick starts, even in cold ambient temperatures (snow blower use). The mechanical throttle cable is replaced by an electric linkage that is not susceptible to wear or freezing.
  • 2018
  • John Deere
  • X590, 48-in. Deck
  • Base
  • Riding
  • Model: FS730 EFI
  • Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
  • 25.5 hp (19 kW)
  • 44.3 cu in. (726 cc)
  • V-twin, cast-iron liners
  • Constant-speed electronic
  • No choke required
  • Air
  • Dry, replaceable with foam precleaner
  • Transaxle: Replaceable
  • Gasoline
  • Delivery: Open-loop electronic fuel injection (EFI)
  • Gauge on dash
  • Power, hydraulic
  • Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Dual belt
  • Standard
  • Fuel tank location: Rear | Hourmeter | Reflectors | 12-V outlet | Cruise Control: button on dash | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Weight bracket: Standard front and rear - each holds up to four Quik-Tatch weights, 42 lb (19 kg) | Floor mats: Sure-grip rubber | Storage: under seat and covered toolbox | Service interval decal | Handles | Cup holder | Tilt steering wheel: Standard, five position | Preset cut height | Mower deck type: Side discharge | Mower wash port | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
  • Internal wet disc
  • Cast iron front axle, front wheel ball bearings
  • 16x6.5-8 turf
  • 24x12-12 turf
  • Mower: Four | Mower adjustment: Seven-position, spring-loaded pin | Mower, rotate: Yes, 90 degrees for easy mower removal
  • 12 V (500 CCA)
  • Flywheel alternator, regulated, 15 amp
  • Transaxle Forward speed: 0-7.2 mph (0-11.6 km/h) | Transaxle Reverse speed: 0-5.2 mph (0-8.4 km/h)
  • Equipment mounting: Yes, heavy duty | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
  • Welded heavy-duty
  • Fuel fill opening, On left fender: 3 in. (7.6 cm) | Steering, Uncut circle radius: 27 in. (68.6 cm)
  • 79 in. (201 cm)
  • 52.25 in. (132.7 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 41 in. (104.1 cm)
  • 51.2 in. (130 cm)
  • 48 in. (122 cm)
  • Steering: 22 in. (55.9 cm)
  • Back: 21 in. (53.3 cm)
  • Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm)
  • 14 in. (35.6 cm)
  • Tank: 4.4 U.S. gal. (16.7 L)
  • Mower, no fuel: 797 lb (362 kg)
  • Two standard, incandescent, 27 W
  • Meets ANSI standard | Meets OPEI standard | Safety video
  • High-back | Suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
  • Type: Hydraulic
  • Hood: Molded-in color hood material reduces sound, will not rust or dent
  • Fender: Stamped steel | Mower: Stamped steel deck shell, 10 gauge 0.135 in. (3.4 mm)
  • Bushings: Metal, replaceable
  • 13 positions
  • U.S.: 4 year/500 hour bumper-to-bumper
  • 48
  • KAWASAKI
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $7,195.00
  • Oakland, Maryland
  • Pre-Owned
  • 2018
  • John Deere
  • X590, 48-in. Deck
  • GREEN
  • KAWASAKI
  • 25.5
  • 472
  • Equipment mounting: Yes, heavy duty | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
  • Gas
  • Available
  • With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 41 in. (104.1 cm)
  • 52.25 in. (132.7 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • 48
  • KAWASAKI
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.