2025 John Deere M Series Z950M 72 in FastBack™ PRO

Information

2025 John Deere M Series Z950M 72 in FastBack™ PRO

Features may include:

Powerful 27-hp (20.1-kW) commercial-grade engine delivers class-leading performance and efficiency
  • Overhead valve design
  • More horsepower and torque per cubic inch of displacement
  • Better fuel efficiency
Available Mulch On Demand™ deck
  • Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break- it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provides for easy machine mounting.
  • Mulch On Demand decks are superior to aftermarket chute blockers due to the movable baffles.
  • Deluxe comfort seat with armrests
  • Deluxe comfort seat with armrests and isolation
  • Fully adjustable suspension seat with armrests

Photos

Highlights

  • Oakland, Maryland
  • 2025
  • John Deere
  • M Series Z950M 72 in FastBack™ PRO
  • Hydrostatic
  • Gasoline
  • Available
  • With chute down: 173, 188, 218 cm (68, 74, 86 in) / Rear discharge: 192.5 cm (75.8 in)
  • With ROPS up: 185 cm (73 in) / With ROPS down: 119 cm (47 in) | Of-cut range: Increments 0.64 cm (0.25 in) 2.54-14 cm (1-5.5 in)

Specifications

  • 2025
  • John Deere
  • M Series
  • Z950M 72 in FastBack™ PRO
  • Zero-Turn Mower
  • FX850V
  • 20.1 kW (27 hp)
  • Gross at 3,600 rpm
  • Two
  • 852 cc (52 cu in)
  • Full pressure
  • Air
  • Pre-cleaner Yes Heavy-duty canister type with safety element
  • Operator presence starting system: Brake-N-Go (hand)
  • Gasoline
  • Drive: V-belt | Electro-magnetic: 305 Nm (225 lb-ft )
  • Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Twin levers
  • Hydrostatic
  • Dynamic braking: Twin levers | Park brake: Internal wet disk integrated in the transmission | Park brake actuation: Hand brake
  • Caster wheel type: Flat free | Drive wheels: 24x12-12 | Caster wheels: 13x6.5-6
  • Anti-scalp rollers: RH, center, LH
  • Anti-scalp rollers: Standard
  • 24x12-12 | Load rating: 4 PR
  • 12 V
  • Cold cranking amp: 300 amp | Hour meter: Standard, digital
  • 30 amp
  • Consumption: 4.2-7.2 L/hr (1.1-1.9 U.S. gal./hr)
  • Blade tip speed: Approximately 18,000 fpm | Speed range: 0-12 mph 0-19.3 km/h | Forward: 0-12 mph 0-19.3 km/h | Reverse: 0-4.5 mph 0-7.2 km/h
  • Full flow, replaceable
  • Mower deck size: 72-in. (183-cm) | Blades Thickness: 0.64 cm (0.25 in)
  • 54, 60, 72 in. (137, 152, 183 cm)
  • 84 in. (213 cm)
  • With chute down: 173, 188, 218 cm (68, 74, 86 in) / Rear discharge: 192.5 cm (75.8 in)
  • With ROPS up: 185 cm (73 in) / With ROPS down: 119 cm (47 in) | Of-cut range: Increments 0.64 cm (0.25 in) 2.54-14 cm (1-5.5 in)
  • 5.6 L (5.9 U.S. qt)
  • Tank: 43.5 L (11.5 U.S. gal.)
  • Blade Number: Three | Mower deck: 7Iron™ PRO Mulch On Demand™
  • 588 to 640 kg (1,296 to 1,412 lb)
  • 7-gauge, 0.179-in. (4.6-mm) one-piece forged steel
  • 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation